Telnetd.device Unit 1

The name says it all!
Fri Dec 18, 2015 11:45 pm


  • If you are setting up telnetd.device I would recommend the following:

    Top speed should be = 19200
    Always setup your first telnet node as unit 1
    (Do not use 0)
    and continue on for additional nodes: 2,3 etc..

    Black Beard
    User avatar
    Black Beard
     
    Posts: 49
    Joined: Sun Mar 30, 2014 9:17 pm

Fri Sep 09, 2016 9:16 pm

Fri Sep 09, 2016 11:30 pm


  • I have run into some odd issues when using unit 0 for my local node.
    It usually occurs in installations with 2+ telnet nodes.
    I forget what the issue is, but I think the node wouldn't answer properly.
    Just out of curiosity how many nodes are you running?


    Black Beard
    User avatar
    Black Beard
     
    Posts: 49
    Joined: Sun Mar 30, 2014 9:17 pm

Mon Sep 26, 2016 5:59 pm


  • I'm running 5 nodes, but this is in the ABBS Bulletin Board system, not AmiExpress. Running 5 nodes.

    My main problem is those botnets banging on port 23 all the time which results in crashing the nodes at the end....
    Do you have a problem with this?
    Firestone
     
    Posts: 4
    Joined: Fri Sep 09, 2016 2:55 pm

Tue Sep 27, 2016 11:44 am



Return to Troubleshooting AmiExpress




Information
  • Who is online
  • Users browsing this forum: No registered users and 6 guests
cron