Page 1 of 1
up/download
Posted:
Thu Jan 11, 2018 7:45 am
by sandman
Hello, upload to my bbs is fast but download is like the old modem speed. Is there anything to do to speed up the download speed?
/sandman
Re: up/download
Posted:
Sun Jan 14, 2018 9:41 pm
by Black Beard
Make sure telnetd.device is setup using the following speed:
Top speed should be = 19200
Re: up/download
Posted:
Mon Jan 15, 2018 12:48 pm
by sandman
Re: up/download
Posted:
Thu Jan 18, 2018 12:34 am
by Black Beard
I just remembered people having problems with certain terminal programs.
I personally use Zoc7 for windows because it has the best batch uploading/downloading features.
Demo it and see if it helps.
Re: up/download
Posted:
Thu Jan 18, 2018 6:58 am
by sandman
Hi, it did not help with zoc7, still upload is fast but download slow.
What is the reason with the 19200 top speed?
I tested to chage it on node1 to 921600 in:
bbs:node1/serial/INTERNAL_UNIT.info
SERIAL.UNIT=1
SERIAL.BAUD=921600
SERIAL.DRIVER=telnetd.device
SYS:Internet/genesis/db/telnetd-device.conf
1541 3 pacerate 921600 255.255.255
Now both up/download is fast with both syncterm and soc7, also installed xprzmodem.library v3.51.
I might get into other problems if I have it higher than 19200?
/sandman
Re: up/download
Posted:
Sat Jan 20, 2018 4:49 pm
by Black Beard
Uploads/downloads were unstable at faster speeds.
A lot of errors and batch transfers failing.
If it works for you, continue to monitor it and see how it goes.
Re: up/download
Posted:
Sat Jan 20, 2018 4:51 pm
by Black Beard
Also, are you transferring over the internet or local lan?
You should have someone else test it from the outside at 19200 just in case.
Re: up/download
Posted:
Tue Jan 23, 2018 8:15 am
by sandman
I had a friend to test both download & upload over the internet, it went well no crc errors and good speed, he had 95000 cps in download speed. And the files was ok to unpack without any errors. He used Syncterm, I have tried both syncterm och zoc7 on the local lan and it have been ok.
I'll leave the settings like this for a while to see if there is any other problems showing up.